Description

Bead wire separator

Bead wire separator is used to remove a bundle of steel wires intactly from tyre sidewalls and beads.

Use:

Principle:

putting the bead wire into the clearance of the two rollers, feeding it from the bottom, the whole steels and rubber outside can be separted by the two rollers working in   different direction.

Technical Data

Instructions for use:

1. The machine is used for the treatment of waste steel wire tires. The gap between two rollers can be adjusted reasonably according to the actual situation of tires, and the lead screw bolts can be adjusted. Frequently check the gear engagement in the gearbox. The middle limit plate of the front and rear axle seats can be adjusted and replaced according to the situation if necessary.

2. 
   

Note:

1. The reducer is not lubricated when the equipment leaves the factory.

2. Frequently check the connecting bolts of each part to ensure they are not loose

3. Work roll and V-belt are vulnerable parts, and the damage of reducer due to lack of oil is not within the scope of three guarantees.